Configuring Protected VPLS

To configure a protected VPLS, use the following command:
create esrp esrp_domain {type [vpls-redundancy | standard]}

configure {l2vpn} vpls vpls_name redundancy [esrp esrpDomain | eaps | stp]
To unconfigure a protected VPLS, use the following command:
unconfigure {l2vpn} vpls vpls_name redundancy [eaps | esrp | stp]
To display information about the protected VPLS, use the following command:
show esrp { {name} | {type [vpls-redundancy | standard]} }