Enabling and Disabling Diffserv Examination
When a packet arrives at the switch on an ingress port and Diffserv examination is enabled, the switch uses the DSCP value to select the egress QoS profile that forwards the packet. The QoS profile configuration defines the forwarding characteristics for all traffic assigned to the QoS profile.
The DiffServ examination feature is disabled by
default. To enable DiffServ examination, use the following command:
enable diffserv examination ports [port_list | all]
NoteWhen DiffServ examination is enabled on 1 Gigabit Ethernet ports for ExtremeSwitching series switches, 802.1p replacement is enabled and cannot be disabled. The ingress 802.1p value is replaced with the 802.1p value assigned to the egress QoS profile.
To disable DiffServ examination, use the following
disable diffserv examination ports [port_list | all]