Viewing Switch Licenses and License Restrictions

  1. To view the current license information for the stack, log into that master node and enter the show licenses {[slot slot |all]} {detail} command with the all option.
    The command displays information similar to the following:
    # show licenses slot all
     Slot Enabled License          Effective License        Feature Packs
     ---- ------------------------ ------------------------ ------------------------
     1    Base                     Base                     None
     2    Premier                  Base                     MACsec
                                                            
                                                            

    The Enabled License Level is the purchased license level. This is the maximum level at which this node can operate without purchasing a license level upgrade.

    The Effective License Level is the operating license level. If a license level restriction is configured for this node, the effective license level may be lower than the enabled license level. All master-capable switches must be operated at the same effective license level.

    Feature Packs shows which feature packs are installed on that node.

  2. On the master node, run show stacking configuration to view the license level restrictions configured for all nodes in a stack.
    Slot-1 stack.2 # show stacking configuration
    Stack MAC in use: 02:04:96:9c:e4:39
    Node               Slot         Alternate          Alternate
    MAC Address        Cfg Cur Prio Mgmt IP / Mask     Gateway         Flags     Lic
    ------------------ --- --- ---- ------------------ --------------- --------- ---
    *00:04:96:9c:e4:39 1   1   Auto <none>             <none>          CcEeMm-Nn --
     00:04:96:9b:c1:34 2   2   Auto <none>             <none>          CcEeMm-Nn --
     00:04:96:9e:5c:76 3   3   Auto <none>             <none>          --EeMm-Nn --
     00:04:96:9c:53:b6 4   4   Auto <none>             <none>          --EeMm-Nn -e
    * - Indicates this node
    Flags:  (C) master-Capable in use, (c) master-capable is configured,
            (E) Stacking is currently Enabled, (e) Stacking is configured Enabled,
            (M) Stack MAC in use, (m) Stack MACs configured and in use are the same,
            (i) Stack MACs configured and in use are not the same or unknown,
            (N) Enhanced protocol is in use, (n) Enhanced protocol is configured,
            (-) Not in use or not configured
    License level restrictions: (B) Base, or (P) Premier in use,
            (b) Base, or (p) Premier configured,
            (-) Not in use or not configured
License level restrictions appear in the Lic column. The license level restriction in use appears first, represented by a capital letter as shown in the display legend. The configured license level restriction appears second, represented by a lower-case letter. When the letters in the Lic column are different, for example -e or Ae, the node is configured with a different license level restriction than the one that is currently in use.

To put the configured license level restriction into effect, you must reboot the node.