Displaying Port PoE Configuration

To display PoE configuration for each port, use the following command:

show inline-power configuration ports {port_list}

This command provides the following information:

  • Config—Indicates whether the port is enabled to provide inline power:

    • Enabled: The port can provide inline power.
    • Disabled: The port cannot provide inline power.
  • Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.

  • Label—Displays a text string, if any, associated with the port (15 characters maximum).

  • Priority – Displays the configured PoE priority of the port.

  • Detection – Displays the configured detection of the PoE Port

  • Classification – Displays the configured classification of the PoE Port

  • Fast – Displays the configured status of fast PoE of the PoE Port