Temperature Operating Range
series switches, if a switch runs outside the expected range, the
switch logs an error message, generates a trap, and one of the following actions occurs:
- On a SummitStack slots, the reset/none option from configure sys-recovery-level [all | none]
command determines the action that
- On ExtremeSwitching X430-8p
switches, the device is shut down regardless of the recovery level, and after reboot you
are prompted whether or not to boot the switch.
- For all switches, other than the ExtremeSwitching X430-8p, only a warning is logged and the switch continues to run
with the system state as "overheat." If the temperature increases further into overheat
condition, after the operating temperature exceed a further higher temperature, the
hardware resets the switch.