Using the Port Monitoring Display Keys

Port Monitoring Display Keys with Auto-Refresh Enabled describes the keys used to control the displays that appear if you use any of the show ports commands without specifying the no-refresh parameter (this is the default behavior).

Table 1. Port Monitoring Display Keys with Auto-Refresh Enabled
Key(s) Description
[U] Displays the previous page of ports.
[D] Displays the next page of ports.
[Esc] Exits from the screen.
[0] Clears all counters.
[Space] Cycles through the following screens:
  • Packets per second
  • Bytes per second
  • Percentage of bandwidth
Note: Available only using the show ports utilization command.

Port Monitoring Display Keys with Auto-Refresh Disabled describes the keys used to control the displays that appear if you use any of the show ports commands and specify the no-refresh parameter.

Table 2. Port Monitoring Display Keys with Auto-Refresh Disabled
Key Description
[Q] Exits from the screen.
[Space] Displays the next page of ports.