Replacing a DSCP on Egress
-
To replace DSCPs by enabling DiffServ replacement, use the
command:
enable diffserv replacement ports [port_list | all]
Note
The port in this command is the ingress port. -
To disable this feature, use the command:
disable diffserv replacement ports [port_list | all]
-
To view the current DiffServ replacement configuration,
use the command:
show diffserv replacement
-
To change the DSCP mapping, use the commands:
configure diffserv replacement [{qosprofile} qosprofile | priority priority] code-point code_pointunconfigure diffserv replacement