Configuring WRED on an Egress QoS Profile
-
To configure or unconfigure WRED on an egress
QoS profile, use the following commands:
configure {qosprofile} {egress} qosprofile [wred [{color [tcp [green | red] | non-tcp [any|red]] [{min-threshold min_thresh} {max-threshold } {max-drop-rate max_drop_rate}]} | avg-weight avg_weight]] ports [port_list | all]unconfigure qosprofile wred {ports [port_list | all]}
-
To display the WRED configuration settings, use
the following command:
show wredprofile {ports [port_list | all]}