EXTREME-VLAN-MIB

The following tables, groups, and variables are supported in this MIB.
Note

Note

SNMP Set operations are not allowed for "Mgmt" and "Default" VLANs.
Table/Group Supported Variables Comments
extremeVirtualGroup extremeNextAvailableVirtIfIndex
extremeVlanIfTable extremeVlanIfIndex

While creating a new row in the extremeVlanIfTable, the value of the object extremeVlanIfDescr must be specified.

For all tables in this MIB that contain objects with RowStatus semantics, the only values supported are:

{active, createAndGo, destroy}.

extremeVlanIfDescr This is a description of the VLAN interface.
extremeVlanIfType The VLAN interface type.
extremeVlanIfGlobalIdentifier Not supported.
extremeVlanIfStatus

The status column for this VLAN interface.

This object can be set to: active (1); createAndGo (4); createAndWait (5); destroy (6). The following values may be read: active (1); notInService (2); notReady (3).

extremeVlanIfIgnoreStpFlag Not supported.
extremeVlanIfIgnoreBpduFlag Not supported.
extremeVlanIfLoopbackModeFlag Setting this object to true causes loopback mode to be enabled on this VLAN.
extremeVlanIfVlanId The VLAN ID of this VLAN.
extremeGlobalMappingTable Not supported
extremeVlanEncapsTable Not supported
extremeVlanIpTable All objects For all tables in this MIB that contain objects with RowStatus semantics, the only values supported are: {active, createAndGo, and destroy}.
extremeVlanProtocolTable Not supported
extremeVlanProtocolBindingTable Partial

For all tables in this MIB that contain objects with RowStatus semantics, the only values supported are: {active, createAndGo, and destroy}.

New to the ExtremeXOS software: association of a protocol filter and VLAN.

extremeVlanProtocolVlanTable Not supported
extremeVlanProtocolDefTable Partial

For all tables in this MIB that contain objects with RowStatus semantics, the only values supported are: { active, createAndGo, and destroy}

New to the ExtremeXOS software: This is a new table introduced to add a protocol filter with etype values during creation of the filter itself.

extremeVlanOpaqueTable All objects This is a read only table. For adding ports to a VLAN or deleting ports from a VLAN, use extremeVlanOpaqueControlTable.
extremeVlanOpaqueControlTable All objects

For all tables in this MIB that contain objects with RowStatus semantics, the only values supported are: {active, createAndGo, and destroy}.

New to the ExtremeXOS software: extremeVlanOpaqueControlTable is a write only table and cannot be used to read. This is used to add/delete ports on a VLAN.

extremeVlanStackTable All objects Not supported.
extremeVlanL2StatsTable