Configure the Originating Next Hop Address for Outgoing Updates
-
To configure outgoing updates to the specified neighbors
to specify the address of the BGP connection originating the
update as the next hop address, use the following command:
configure bgp neighbor [remoteaddr | all] {address-family [ipv4-unicast | ipv4-multicast | ipv6-unicast | ipv6-multicast | vpnv4]} [next-hop-self | no-next-hop-self]
-
To make a configuration change for the neighbors in a peer
group, use the following command:
configure bgp peer-group peer-group-name {address-family [ipv4-unicast | ipv4-multicast | ipv6-unicast | ipv6-multicast | vpnv4]} [next-hop-self | no-next-hop-self]