Enabling and Disabling MLD on a VLAN
MLD is disabled by default on all VLANs. You can enable MLD using the enable mld {vlan vlan name} {MLDv1 | MLDv2} command.
This allows IPv6 hosts to register with IPv6 multicast groups and receive IPv6 multicast traffic.
- To disable MLD on a VLAN after it has been enabled, use the disable mld {vlan name} command.
- To enable MLD on a VLAN after it has been disabled, use the enable mld {vlan vlan_name} {MLDv1 | MLDv2} command.