Enabling or Disabling a Layer 2 VPN Service
-
To enable a Layer 2 VPN service, use the following
command:
enable l2vpn [vpls [vpls_name | all] | vpws [vpws_name | all]] service
By default, any configured Layer 2 VPN service is enabled.
-
To disable a service from the Layer 2 VPN, use the
following command:
disable l2vpn [vpls [vpls_name | all] | vpws [vpws_name | all]] service
When the service is disabled, the service is disconnected from the Layer 2 VPN and disabled such that no packets are sent to or received from the service. The pseudowires to each of the configured peers for this Layer 2 VPN are terminated.