Traceroute
The traceroute command enables you to trace the path between the switch and a destination endstation.
traceroute {vr vrid} {ipv4 host} {ipv6 host} {ttl number} {from from} {[port port] | icmp}- vr
- The name of the virtual router.
- ipv4/ipv6
- The transport.
- from
- Uses the specified source address in the ICMP packet. If not specified, the address of the transmitting interface is used.
- host
- The host of the destination endstation. To use the hostname, you must first configure DNS.
- ttl
- Configures the switch to trace the hops until the time-to-live has been exceeded for the switch.
- port
- Uses the specified UDP port number.
- icmp
- Uses ICMP echo messages to trace the routed path.