Verifying a Universal Port Profile
To verify a Universal Port profile configuration, trigger the profile
and verify that it works properly. Trigger the profile based on the trigger type as
follows:
- Device triggers–plug in the device
- Authentication triggers–authenticate a device or user
- Timer triggers–temporarily configure the timer for an approaching time
- EMS event triggers–reproduce the event to which the trigger responds
You can use the commands described earlier in this section to view information about the profile and how it behaves.
Because Universal Port works with multiple switch features, you might want to enter commands to examine the configuration of those features.
The following commands are an example of some of the commands that can provide additional information about profile operation.
Run:
show lldp show lldp neighbors show log show netlogin