Configuring H-VPLS Spoke Nodes
-
To configure an MTU as an H-VPLS spoke node, use the
following command:
configure l2vpn [vpls vpls_name | vpws vpws_name] add peer ipaddress {{core {full-mesh | primary | secondary} | spoke}
Use the core primary and core secondary command options as needed. The core primary option specifies that the spoke node peer is a core node and that the link between the peers is the primary spoke. The core secondary option specifies that the spoke node peer is a core node and that the link between the peers is the secondary spoke.
-
To delete an H-VPLS spoke node, use the following
command:
configure l2vpn [vpls vpls_name | vpws vpws_name] delete peer [ipaddress | all]