Flow MonitorNEW!

Flow Monitor provides IP Flow Information Export (IPFIX) and K-Mirror support based on RFC 7011 to collect and export flow records for Universal platforms. Flow Monitor builds on IPFIX by providing additional metering and exporting processes. Flow Monitor enables switches to gather information about flows through different ports on each switch and export the flow records (via UDP) to a remote collector(s). This information can be used to analyze application and network usage, and monitor real-time network infrastructure.

Tip

Tip

Flow Monitor for Switch Engine version 32.2 is for demonstration purposes only. Full functionality will be available in a future software version.

Flow Monitor supports up to eight external collectors.

Supported Features

The following table lists feature and version support for Flow Monitor:

Table 1. Flow Monitor Feature Support
Feature Switch Engine Version
FTFP match rules, Keygen, Group/Profile, Collector, and Template structures 32.2 and later
Packet sampling (aka, K-mirror) via local port or ERSPANv3 32.2 and later
Flow state transition (TCP SYN/ACK/FIN) 32.2 and later
Hardware-based flow export in RFC7011 IPFIX format 32.2 and later
Hardware aging and flushing of the flow table 32.2 and later
Status to ingress field processor allows flow status to be an input to ACL rule matching 32.2 and later

Supported Platforms

This feature is supported on ExtremeSwitching 5420 and 5520 series switches.

Limitations