PIM-DM Configuration Example

In IP Multicast Routing Using PIM-DM Configuration Example, the system labeled IR 1 is configured for IP multicast routing, using PIM-DM.

Click to expand in new window
IP Multicast Routing Using PIM-DM Configuration Example
Note

Note

The above figure is used in the the OSPF section to describe the OSPF configuration on a switch.

The router labeled IR1 has the following configuration:

configure vlan HQ_10_0_1 ipaddress 10.0.1.2 255.255.255.0
configure vlan HQ_10_0_2 ipaddress 10.0.2.2 255.255.255.0
configure ospf add vlan all area 0.0.0.0
enable ipforwarding
enable ospf
enable ipmcforwarding
configure pim add vlan all dense
enable pim
configure pim state-refresh vlan all on