no

Removes a deny or permit rule from this Association ACL Policy

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

no [deny|permit]

no deny <STARTING-MAC> precedence <1-1000>

no deny <STARTING-MAC> <ENDING-MAC> precedence <1-1000>

no permit <STARTING-MAC> precedence <1-1000>

no permit <STARTING-MAC> <ENDING-MAC> precedence <1-1000>

Parameters

no <PARAMETERS>


no <PARAMETERS>	Removes a deny or permit rule from this association ACL policy

Examples

The following example shows the association ACL policy ‘test‘ settings before the ‘no‘ commands is executed:

nx9500-6C8809(config-assoc-acl-test)#show context
association-acl-policy test
 deny 11-22-33-44-55-01 11-22-33-44-55-FF precedence 150
 deny 11-22-33-44-56-01 precedence 160
 permit 11-22-33-44-66-01 11-22-33-44-66-FF precedence 170
 permit 11-22-33-44-67-01 precedence 180
nx9500-6C8809(config-assoc-acl-test)#

nx9500-6C8809(config-assoc-acl-test)#no deny 11-22-33-44-56-01 11-22-33-44-56-FF precedence 150

The following example shows the association ACL policy ‘test‘ settings after the ‘no‘ commands is executed:

nx9500-6C8809(config-assoc-acl-test)#show context
association-acl-policy test
 deny 11-22-33-44-56-01 precedence 160
 permit 11-22-33-44-66-01 11-22-33-44-66-FF precedence 170
 permit 11-22-33-44-67-01 precedence 180
nx9500-6C8809(config-assoc-acl-test)#