access-type

Defines the captive portal‘s access type. The authentication scheme configured here is applied to wireless clients requesting captive portal guest access to the WiNG network.

Supported on the following devices:

Syntax

access-type [custom-auth-radius|logging|no-auth|radius|registration]

Parameters

access-type [custom-auth-radius|logging|no-auth|radius|registration]

custom-auth-radius

Specifies the custom user information used for authentication (RADIUS lookup of given information, such as name, e-mail address, telephone, etc.). When configured, accessing clients are required to provide a 1-32 character lookup data string used to authenticate their credentials.

When selecting this option, use the custom-auth command to configure the required user information.

logging

Enables logging of user access details.

no-auth

Defines no authentication required for a guest. Requesting clients are redirected to the captive portal Welcome page without authentication.

radius

Enables RADIUS authentication for wireless clients. A requesting client‘s user credentials require authentication before access to the captive portal is permitted. This is the default setting.

registration Enables captive portal‘s clients to self register. When enabled, a requesting client‘s user credentials require authentication locally or through social media credential exchange and validation.

If enabled, use the webpage > internal > registration > field command to customize the registration page. If not customized, the default, built-in registration Web page is displayed.

Examples

nx9500-6C8809(config-captive-portal-test)#access-type logging
nx9500-6C8809(config-captive-portal-test)#show context
captive-portal test
 access-type logging
 access-time 35
nx9500-6C8809(config-captive-portal-test)#

Related Commands

no

Removes the captive portal access type or reverts to default (radius)