router-id

Configures the tunnel's local router ID

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

router-id [<1-4294967295>|<IP>]

Parameters

router-id [<1-4294967295>|<IP>]


router-id [<1-4294967295>\|<IP>]	Configures the tunnel's local router ID in one of the following formats: <1-4294967295> – Router ID in the number format (from1- 4294967295) <IP> – Router ID in IP address format (A.B.C.D)

Examples

nx9500-6C8809(config-profile default-nx5500-l2tpv3-tunnel-Tunnel1)#router-id 2000

nx9500-6C8809(config-profile default-nx5500-l2tpv3-tunnel-Tunnel1)#show context
 l2tpv3 tunnel Tunnel1
  peer 2 hostname tunnel1peer1 udp port 100
  router-id 2000
  establishment-criteria cluster-master
nx9500-6C8809(config-profile default-nx5500-l2tpv3-tunnel-Tunnel1))#

Related Commands


no	Removes the tunnel's router ID