http

Configures the HTTP server settings used to authenticate HTTP connection to a EX3500 switch

Management access to an EX3500 switch can be enabled/disabled as required using separate interfaces and protocols (HTTP, SSH). Disabling un-used and insecure interfaces and unused management services can dramatically reduce an attack footprint and free resources within an EX3500 management policy.

Supported in the following platforms:

Syntax

http [port <1-65535>|secure-port <1-65535>|secure-server|server]

Parameters

http [port <1-65535>|secure-port <1-65535>|secure-server|server]
http Configures following HTTP settings: port, secure-port, secure-server, and server
port <1-65535> Configures the HTTP port number. This is the port used to connect to the HTTP server.
  • <1-65535> – Specify a value from 1 - 65535. The default port is 80.
secure-port <1-65535> Enables secure HTTP connection over a designated secure port. Ensure that the HTTP secure server is enabled before specifying the secure-server port.
  • <1-65535> – Specify the secure HTTP server port from 1 - 65535. The default port is 443.
secure-server Enables HTTP secure server. This option is disabled by default.
server Enables HTTP server. This option is enabled by default. Consequently, HTTP management access is allowed by default.

Examples

nx9500-6C8809(config-ex3500-management-policy-test)#http secure-server
nx9500-6C8809(config-ex3500-management-policy-test)#show context
ex3500-management-policy test
 http secure-server
 enable password level 3 7 12345678901020304050607080929291
 snmp-server notify-filter 1 remote 127.0.0.1
nx9500-6C8809(config-ex3500-management-policy-test)#

Related Commands

no (ex3500-management-policy-config-mode) Reverts to default HTTP server settings (HTTP server enabled, HTTP port 80)