handoff-threshold

Configures the handoff-threshold, which specifies client status for handoff-action. Once exceeded an action is invoked.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

handoff-threshold <-100--40>

Parameters

handoff-threshold <-100--40>


handoff-threshold <-100--40>	Configures the handoff-threshold, which specifies client status for handoff-action. Once exceeded an action is invoked. <-100--40> – Specify the RSSI value from -100 dBm - -40 dBm. The default is -80 dBm. If the client‘s RSSI increases beyond the set handoff-threshold, it is removed from the queue for monitoring and action invocation.

Examples

nx9500-6C8809(config-roaming-assist-policy-test)#handoff-threshold -75

nx9500-6C8809(config-roaming-assist-policy-test)#show context
roaming-assist-policy test
 aggressiveness medium-high
 handoff-count 5
 detection-threshold -90
 handoff-threshold -75
 action log
 disassoc-time 7
nx9500-6C8809(config-roaming-assist-policy-test)#

Related Commands


no	Removes the configured handoff-threshold details