timezone

Configures the RF Domain‘s geographic time zone. By default all WiNG devices are shipped with the time zone and time format set to UTC (Universal Time Coordinated) and 24-hour clock respectively. If the time zone is not reset, all devices within the RF Domain will display time relative to the UTC - Greenwich Time. Resetting the time zone is recommended, especially for RF Domains deployed across different geographical locations. The time zone can either be set on a specific device or on an RF Domain. When configured as RF Domain setting, it applies to all devices within the domain. For more information on configuring the time zone on a device, see timezone (device config mode).

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

timezone <TIMEZONE>

Parameters

timezone <TIMEZONE>


time <TIMEZONE>	Specify the RF Domain‘s time zone. The configured time zone will apply to all devices within the selected RF Domain.

Examples

nx9500-6C8809(config-rf-domain-default)#timezone America/Los_Angeles

nx9500-6C8809(config-rf-domain-default)#show context
rf-domain default
 contact Bob+14082778691
 timezone America/Los_Angeles
 stats update-interval 200
 country-code us
 sensor-server 2 ip 172.16.10.3
 override-smartrf channel-list 2.4GHz 1,2,3 
 override-wlan test vlan-pool 2 limit 20
 layout area Ecospace floor Floor1 map-location www.firstfloor.com units meters
nx9500-6C8809(config-rf-domain-default)#

Use [TAB] to view the built-in timezones.

nx9500-6C8809(config-rf-domain-test)#timezone <TAB>
Africa/     Asia/       Atlantic/   Australia/  CET         CST6CDT
EET         EST5EDT     Etc/        Europe/     MST7MDT     Pacific/
PST8PDT     US/         America/
nx9500-6C8809(config-rf-domain-test)#

Each of these time zones are further differentiated into sub time zones. For example, as shown in the following example:

nx9500-6C8809(config-rf-domain-test)#timezone Africa/
Africa/Cairo         Africa/Casablanca    Africa/Harare
Africa/Johannesburg  Africa/Lagos         Africa/Nairobi
nx9500-6C8809(config-rf-domain-test)#

Related Commands


no (rf-domain-config-mode)	Removes a RF Domain's time zone