no (nac-list-config-commands)

Cancels an exclude or include NAC list rule

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

no [exclude|include]

no [exclude|include] <START-MAC> [<END-MAC> precedence <1-1000>|precedence <1-1000>]

Parameters

no <PARAMETERS>


no <PARAMETERS>	Removes or reverts this NAC list‘s settings based on the parameters passed

Examples

The following example shows the NAC list ‘test‘ settings before the ‘no‘ command is executed:

nx9500-6C8809(config-nac-list-test)#show context
nac-list test
 exclude 00-04-96-B0-BA-2A 00-04-96-B0-BA-2A precedence 1
 include 00-15-70-38-06-49 00-15-70-38-06-49 precedence 2
nx9500-6C8809(config-nac-list-test)#

nx9500-6C8809(config-nac-list-test)#no exclude 00-40-96-B0-BA-2A precedence 1

The following example shows the NAC list ‘test‘ settings after the ‘no‘ command is executed:

nx9500-6C8809(config-nac-list-test)#show context
nac-list test
 include 00-15-70-38-06-49 00-15-70-38-06-49 precedence 2
nx9500-6C8809(config-nac-list-test)#