captive-portal

Profile Config Commands

Configures captive portal advanced Web page uploads on this profile

A captive portal is a means of providing guests temporary and restrictive access to the controller managed wireless network. A captive portal provides secure authenticated controller access by capturing and re-directing a wireless user‘s Web browser session to a captive portal login page, where the user must enter valid credentials. Once the user is authenticated and logged into the controller managed network, additional agreement, welcome, and fail pages provide the administrator with options to control the captive portal‘s screen flow and user appearance.

Supported on the following devices:

Syntax

captive-portal page-upload count <1-20>

Parameters

captive-portal page-upload count <1-20>
page-upload Enables captive portal advanced Web page upload
count <1-20> Sets the maximum number of APs that can be uploaded concurrently
  • <1-20> – Set a value from 1 - 20. The default is 10.

Example

nx9500-6C8809(config-profile-testNX9500)#captive-portal page-upload count 15

nx9500-6C8809(config-profile-testNX9500)#show context include-factory | include
captive-portal
 captive-portal page-upload count 15
  no captive-portal-enforcement
  no captive-portal-enforcement
  no captive-portal-enforcement
  no captive-portal-enforcement
  no captive-portal-enforcement
  no captive-portal-enforcement
 service captive-portal-server connections-per-ip 3
nx9500-6C8809(config-profile-testNX9500)#