no (ip-snmp acl)

Removes a deny or permit rule from the IP SNMP ACL. Use this command to remove IP SNMP ACL as they become obsolete for filtering network access permissions.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

no [deny|permit] [<IP/M>|any|host <IP>]

Parameters

no <PARAMETERS>


no <PARAMETERS>	Removes deny and/or permit access rule from this IP SNMP ACL

Examples

nx9500-6C8809(config-ip-snmp-acl-test)#show context
ip snmp-access-list test
 permit host 192.168.13.13
 deny 192.168.13.0/24
nx9500-6C8809(config-ip-snmp-acl-test)#

nx9500-6C8809(config-ip-snmp-acl-test)#no permit host 192.168.13.13

nx9500-6C8809(config-ip-snmp-acl-test)#show context
ip snmp-access-list test
 deny 192.168.13.0/24
nx9500-6C8809(config-ip-snmp-acl-test)#