clrscr

Clears the screen and refreshes the prompt, irrespective of the mode

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

clrscr

Parameters

None

Examples

The following example shows the terminal window or screen before the clrscr command is executed:

ap505-13403B>device-upgrade ?
  DEVICE-NAME     Name/MAC address of device
  all             Upgrade all devices
  ap505           Upgrade AP505 Device
  ap510           Upgrade AP510 Device
  cancel-upgrade  Cancel upgrading the device
  containing      Specify devices that contain a sub-string in the hostname
  load-image      Load the device images to controller for device-upgrades
  rf-domain       Upgrade all devices belonging to an RF Domain

ap505-13403B>

ap505-13403B>clrscr [ENTER]

The terminal window or screen after the clrscr command is executed:

ap505-13403B>