t5

Displays adopted T5 controller statistics
Note

Note

This command is applicable only on WiNG controllers with adopted and managed T5 controllers.

Supported in the following platforms:

Syntax

show t5 [boot|clock|cpe|interface|mac|system|temperature|uptime|version|
wireless] {on <T5-DEVICE-NAME>}
show t5 [boot|clock|system|temperature|uptime|version] 
{on <T5-DEVICE-NAME>}
show t5 cpe [address|boot|ether port status|led|reset|system|uptime|version] 
{on <T5-DEVICE-NAME>}
show t5 interface [dsl|fe|ge|radio]
show t5 interface [dsl|fe|ge] [counter|description|errors|status|utilization] 
{on <T5-DEVICE-NAME>}
show t5 interface dsl custom [avg|dses|dsses|peak|uses|usses] 
{on <T5-DEVICE-NAME>}
show t5 interface radio [stats|status|wlam-map] 
{on <T5-DEVICE-NAME>}
show t5 mac table [filter name [dsl<1-24>|ge <1-2>|vlan <1-4094>|wlan <1-24>] 
{on <T5-DEVICE-NAME>}
show t5 wireless [client|wlan]
show t5 wireless client {filter name [association-status|authentication-status|
bss|mac-address|retry-percentage|rssi-value]} {on <T5-DEVICE-NAME>}
show t5 wireless wlan counters [qos|rate|size] 
{on <T5-DEVICE-NAME>}

Parameters

show t5 [boot|clock|system|temperature|uptime|version] 
{on <T5-DEVICE-NAME>}
t5 Displays adopted T5 controller statistics
boot Displays the T5 device‘s boot details. Use this option to view the primary and secondary image files available to use for booting up.
clock Displays the T5 controller‘s system time, as reported from the controller itself or its remote NTP time resource
system Displays T5 controller‘s system information, which includes the T5 controller‘s hostname, MAC address, RF Domain, system clock, uptime
temperature Displays T5 controller‘s current temperature
uptime Displays the T5 controller‘s uptime (the time it has been actively deployed and operational)
version Displays the T5 controller‘s primary and secondary firmware images
on <T5-DEVICE-NAME> Optional. Executes the command on a specified T5 device
  • <T5-DEVICE-NAME> – Specify the T5 device‘s hostname. An error message is displayed if no T5 device name is specified.
show t5 cpe [address|boot|ether port status|led|reset|system|uptime|version] 
{on <T5-DEVICE-NAME>}
t5 Displays adopted T5 controller statistics
cpe Displays the T5 controller managed Customer Premises Equipment (CPE) statistics based on the parameters passed. Use this command to verify each CPE address credentials and whether currently disconnected or ready for radio coverage area support.
address Displays each linked CPE's current IP address used as its network identifier
boot Displays the primary and secondary firmware versions available to each CPE, along with status of the most recent upgrade operation details
ether port status Displays Ethernet port status
led Displays whether the CPEs currently have their LEDs enabled or disabled. In places like hospitals, its not uncommon for access points to be operational, but their LEDs off as to not disturb patients.
reset Displays the number times a CPE has been reset
system Displays device hardware and SKU information for each CPE. Use this information to assess whether a controller is managing the correct CPE devices out of the total number of CPEs available.
uptime Displays the time each CPE device has been actively deployed and operational
version Displays the application and boot versions utilized by the CPE devices
on <T5-DEVICE-NAME> Optional. Executes the command on a specified T5 device
  • <T5-DEVICE-NAME> – Specify the T5 device‘s hostname. An error message is displayed if no T5 device name is specified.
show t5 interface [dsl|fe|ge] [counter|description|errors|status|utilization] 
{on <T5-DEVICE-NAME>}
t5 Displays adopted T5 controller statistics
interface Displays T5 interface-related statistics based on the interface selected
[dsl|fe|ge|radio] [counter|description| errors|status| utilization] Select the interface type. The options are: dsl, fe, and ge.
  • dsl – Displays Digital Subscriber Line (DSL) interface related information
  • fe – Displays Fast Ethernet (FE) interface related information
  • ge – Displays Gigabit Ethernet (GE) interface related information
The system displays the following information for the DSL, GE, and FE ports:
  • counter – Displays the following:
    • Number of octets (bytes) received and transmitted on this port
    • Number of data packets received and transmitted on this port
    • Number of flow control (layer 2) packets received and transmitted on this port
  • description – Displays the following:
    • The selected port‘s name
    • The numeric index assignable to each port
    • The 64 character maximum, unique, administrator-assigned description to each port
  • errors – Displays the following DSL interface related errors:
    • The name of the DSL utilized by each T5 controller connected CPE device
    • The number of FECs detected in the downstream direction. Forward Error Correction (FEC) or channel coding is used for controlling errors over unreliable or noisy communication channels.
    • The number of CPE DSL coding violations (badly coded packets) detected in the downstream direction.
    • The number of FECs detected in the upstream direction.
    • The number of CPE DSL coding violations (badly coded packets) detected in the upstream direction.
  • status – Displays the following:
    • The selected port‘s name
    • Whether the port is currently up or down as a T5 controller transmit and receive resource
    • The port's current speed in MB
    • Whether pause packet utilization is currently off or on for the selected port
    • Whether each listed port is enabled or disabled by the administrator
  • utilization – Displays the following:
    • The selected port‘s name
    • The port‘s receive and transmit data rates (in Kbps)
    • The packet per second port receive and transmit rates (p/s)
    • Each port's receive and transmit direction utilization as a percentage of the total transmit bandwidth available.
on <T5-DEVICE-NAME> Optional. Executes the command on a specified T5 device
  • <T5-DEVICE-NAME> – Specify the T5 device‘s hostname. An error message is displayed if no T5 device name is specified.
show t5 interface dsl custom [avg|dses|dsses|peak|uses|usses] 
{on <T5-DEVICE-NAME>}
t5 Displays adopted T5 controller statistics
interface Displays T5 interface-related statistics based on the interface selected
dsl Selects A T5 controller‘s DSL interface.

A T5 controller uses the operating system to manage its connected radio devices, as opposed to the WiNG operating used by RFS controllers and NX service platforms. However, a T5 controller, once enabled as a supported external device, can provide data to WiNG to assist in a T5‘s management within a WiNG supported subnet populated by both types of devices. The CPEs are the T5 controller managed radio devices using the operating system. These CPEs use a DSL as their high speed Internet access mechanism using the CPE‘s physical wallplate connection and phone jack.

custom [avg|dses|dsses|peak|uses|usses] Displays following custom CPE DSL data:
  • avg – Each DSL's average response time in microseconds
  • dses – The number of seconds downstream DSL transmissions were negatively impacted by code violations.
  • dsses – The number of seconds downstream DSL transmissions were severely negatively impacted by code violations.
  • peak – Each DSL's maximum (best to date since the screen was refreshed) response time in microseconds.
  • uses – The number of seconds upstream DSL transmissions were negatively impacted by code violations.
  • usses – The number of seconds upstream DLS transmissions were severely negatively impacted by code violations.
on <T5-DEVICE-NAME> Optional. Executes the command on a specified T5 device
  • <T5-DEVICE-NAME> – Specify the T5 device‘s hostname. An error message is displayed if no T5 device name is specified.
show t5 interface radio [stats|status|wlam-map] {on <T5-DEVICE-NAME>}
t5 Displays adopted T5 controller statistics
interface Displays T5 interface-related statistics based on the interface selected
radio [stats|status| wlan-map] Displays following radio interface related information:
  • stats – Displays T5 radio interface statistics. A T5 controller uses the operating system to manage its connected radio devices, as opposed to the WiNG operating used by RFS controllers and NX service platforms. However, a T5 controller, once enabled as a supported external device, can provide data to WiNG to assist in a T5‘s management within a WiNG supported subnet populated by both types of devices. The CPEs are the T5 controller managed radio devices using the operating system. Use this option to view the following:
    • name – The administrator assigned name of each listed CPE radio as its unique identifier
    • Rx (Kbps) – The listed CPE radio's receive data rate (in Kbps). Use this information to assess RF activity versus other T5 managed CPE radios in the same radio coverage area.
    • Rx Octets – The number of octets (bytes) received with no errors by the listed T5 controller managed CPE radio.
    • Rx Packets – The number of data packets received for the listed T5 managed CPE radio since this screen was last refreshed.
    • Tx (Kbps) – The listed CPE radio's transmit data rate (in Kbps). Use this information to assess RF activity versus other T5 managed CPE radios in the same radio coverage area.
    • Tx Octets – Displays the number of octets (bytes) transmitted with no errors by the listed T5 controller managed CPE radio.
    • Tx Packets – The number of data packets transmitted from the listed T5 managed CPE radio since this screen was last refreshed.
  • status – Displays T5 radio interface status information
    • name – The administrator assigned name of each listed CPE radio as its unique identifier.
    • Operational status – The radio interface‘s operational status (enabled/disabled).
    • mac – The T5 radio interface's MAC address.
    • transmit power – The T5 radio interface‘s transmit power.
    • Channel – The T5 radio interface‘s channel of operation.
  • wlan-map – Displays WLAN map membership data for T5 controller managed CPE radio devices. Use this option to view the following:
    • name – The administrator assigned name of each listed CPE radio as its unique identifier.
    • status – Whether a CPE radio is currently enabled or disabled as a radio resource for the WLAN(s) the CPE radio has been mapped to.
    • wlan-radio-mapping – The managed WLAN(s) each listed radio has been mapped to.
on <T5-DEVICE-NAME> Optional. Executes the command on a specified T5 device
  • <T5-DEVICE-NAME> – Specify the T5 device‘s hostname. An error message is displayed if no T5 device name is specified.
show t5 mac table [filter name [dsl<1-24>|ge <1-2>|vlan <1-4094>|wlan <1-24>] 
{on <T5-DEVICE-NAME>}
t5 Displays adopted T5 controller statistics
mac table [dsl<1-24>|ge <1-2>| vlan <1-4094>| wlan <1-24>] Displays T5 MAC address table. The T5 MAC table displays a dynamic list of MAC addresses learned by the T5 controller over its ethernet interfaces. Use this information to identify devices and the interfaces on which they can be found.
Use the following additional filters to filter on the basis of the VLAN or DSL interface:
  • dsl <1-24> – Filters information on the basis of the selected DSL port
  • ge <1-2> – Filters information on the basis of the selected GE port
  • vlan <1-4094 – Filters information on the basis of the selected VLAN port
  • wlan <1-24> – Filters on the basis of the selected CPE
on <T5-DEVICE-NAME> Optional. Executes the command on a specified T5 device
  • <T5-DEVICE-NAME> – Specify the T5 device‘s hostname. An error message is displayed if no T5 device name is specified.
show t5 wireless client {filter name [association-status|authentication-status|bss|
mac-address|retry-percentage|rssi-value]} {on <T5-DEVICE-NAME>}
t5 Displays adopted T5 controller statistics
wireless client Displays the T5 wireless client and WLAN related statistics
  • client – Displays read-only device information for wireless clients associated with the selected T5 controller and its connected CPE device radios. Use this information to assess if configuration changes are required to improve client performance.
Use the additional filters available to view specific client-related information. The options are:
  • association-status
  • authentication-status
  • bss
  • retry-percentage
  • rssi-value
on <T5-DEVICE-NAME> Optional. Executes the command on a specified T5 device
  • <T5-DEVICE-NAME> – Specify the T5 device‘s hostname. An error message is displayed if no T5 device name is specified.
show t5 wireless wlan counters [qos|rate|size] {on <T5-DEVICE-NAME>}
t5 Displays adopted T5 controller statistics
wireless wlan [qos|rate|size] Displays the T5 wireless WLAN related statistics
  • wlan – Displays following T5 controller traffic counter statistics:
    • qos – Displays T5 controller WLAN QoS utilization. Displays the number of background (low priority) and best-effort packets received and transmitted on each listed T5 controller managed WLANs
    • rates – Displays T5 controller's WLAN utilization data rate statistics
      • Lists the number of data packets received and transmitted in the WLAN that have been relegated to a 1 Mbps data rate
      • Lists the number of data packets received and transmitted in the WLAN by T5 controller connected devices at 54Mbps
    • size – Displays the number of data packets received and transmitted, in each listed WLAN, greater than 1024 bytes
on <T5-DEVICE-NAME> Optional. Executes the command on a specified T5 device
  • <T5-DEVICE-NAME> – Specify the T5 device‘s hostname. An error message is displayed if no T5 device name is specified.

Examples

The following examples are for show commands executed on the ‘t5-ED7C6C‘ controller adopted by the ‘nx9500-6C8809‘ wireless controller:

nx9500-6C8809(config)#show t5 boot on t5-ED7C6C
Primary Version:  5.4.2.0-010R
Secondary Version:  5.4.2.0-006B
Next Boot: Primary
Upgrade Status: none
Upgrade Progress %:  0
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 version on t5-ED7C6C
Bootloader Version:   5.4.2.0-010R
Application Version:  5.4.2.0-010R
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 system on t5-ED7C6C
Serial Number           14213522400004
SKU                     TS-0524-WR
Hardware Rev            5
Mac Address             B4-C7-99-ED-7C-6C
Description             24-port PowerBroadband VDSL2 Switch Version 5.4.2.0-010R
Contact                 NULL
Name                    t5-ED7C6C
Location                NULL
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 clock on t5-ED7C6C
Time 6-6-2017 17:14:30 UTC
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 interface ge counter on t5-ED7C6C
-------------------------------------------------------------------------------------------------------------------
 INTERFACE RECEIVE OCTETS RECEIVE PACKETS RECEIVE PAUSE PKTS TRANSMIT OCTETS TRANSMIT PACKETS TRANSMIT PAUSE PKTS
-------------------------------------------------------------------------------------------------------------------
  ge1       711128918     89636040         0                  2558110037     133720283         0
  ge2       2515775064    133311355        0                  3422167586     78735853          0
-------------------------------------------------------------------------------------------------------------------
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 uptime on t5-ED7C6C
Up Time 0 days 1 day, 3:19:43
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 temperature on t5-ED7C6C
============ Temperature  ============
--------------------------------------------------------------------
 INDEX CURRENT (C) FANS @ FULL SPEED (C) FANS @ VARIABLE SPEED (C)
--------------------------------------------------------------------
 1      39          70                    60
--------------------------------------------------------------------
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 cpe address on t5-ED7C6C
--------------------------------------------------------------------------------            
DEVICE             STATUS             IP ADDRESS                MAC ADDRESS
--------------------------------------------------------------------------------            
 cpe1             ready             192.168.13.32            00-C0-23-69-80-CD
 cpe2             ready             192.168.13.33            74-6F-F7-40-16-62
 cpe3             disconnected      0.0.0.0                  00-00-00-00-00-00
 cpe4             disconnected      0.0.0.0                  00-00-00-00-00-00
 cpe5             disconnected      0.0.0.0                  00-00-00-00-00-00

--More--
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 cpe led on t5-ED7C6C
---------------------------------------------------------------------------------------
 DEVICE                                 LED STATUS             
-----------------------------------------------------------------------------------
 cpe1                                    enable                                      
 cpe2                                    enable                                      
 cpe3                                    enable                                      
 cpe4                                    enable                                      
 cpe5                                    enable                                      
--More--
nx9500-6C8809(config)#
nx9500-6C8809(config)#show t5 mac table filter name vlan 1 on t5-ED7C6C
---------------------------------------------------------------------------------------
        T5-MAC       VLAN          ADDRESS             INTERFACE                VENDOR
---------------------------------------------------------------------------------------
 B4-C7-99-ED-7C-6C   1              00-02-B3-28-D1-55    ge1                    Intel Corp
 B4-C7-99-ED-7C-6C   1              00-1E-67-4B-BF-BD    ge1                    Intel Corp
 B4-C7-99-ED-7C-6C   1               00-23-68-11-E6-C4    ge1                    Extreme Tech
 B4-C7-99-ED-7C-6C   1               00-23-68-88-0D-A7    ge1                    Extreme Tech
 B4-C7-99-ED-7C-6C   1               00-23-68-99-BB-7C    ge1                    Extreme Tech
 B4-C7-99-ED-7C-6C   1               00-A0-F8-68-D5-70    ge1                    Extreme Tech
 B4-C7-99-ED-7C-6C   1             00-C0-23-69-80-CD    dsl1                   00-C0-23 
 B4-C7-99-ED-7C-6C   1              1C-7E-E5-18-FA-67     ge1                    D-Link Corp
 B4-C7-99-ED-7C-6C   1                3C-CE-73-F4-47-83     ge1                    Cisco Systems
 B4-C7-99-ED-7C-6C   1               74-6F-F7-40-16-62     dsl2                   Wistron Corp
--More--
nx9500-6C8809(config)#