time-rule

Configures a time rule specifying the days and optionally the start and end times. When applied to an application-policy rule, the schedule policy defines the enforcement time of the rule. For more information, see application-policy.

Supported on the following devices:

Access Points — AP410i/e AP460i/e, AP505i, AP510i/e, AP560i/h, AP7602, AP7612, AP7622, AP7632, AP7662, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600
Virtual Platforms — CX9000, VX9000

Syntax

time-rule days [sunday|monday|tuesday|wednesday|thursday|friday|saturday|all|
weekends|weekdays] {start-time <HH:MM> [end-time <HH:MM>]}

Parameters

time-rule days [sunday|monday|tuesday|wednesday|thursday|friday|saturday|all|
weekends|weekdays] {start-time <HH:MM> [end-time <HH:MM>]}


time-rule	Configures a time rule in days and hours and minutes A schedule policy can have more than one non-overlapping time-rules. The following time-rules, having overlapping time periods, are invalid: ‘weekdays, start-time 9:30 am, end-time 11:30 pm‘ and ‘all, start-time 12:00 am, end-time 12:00 pm‘.
days [sunday\|monday\| tuesday\|wednesday\|thursday\|friday\| saturday\|all\| weekends\| weekdays]	Specifies the days on which the time rule is applicable sunday – Applicable on Sundays only monday – Applicable on Mondays only tuesday – Applicable on Tuesdays only wednesday – Applicable on Wednesdays only thursday – Applicable on Thursdays only friday – Applicable on Fridays only saturday – Applicable on Saturdays only weekends – Applicable on weekends only weekdays – Applicable on weekdays only all – Applicable on all days
start-time <HH:MM> [end-time <HH:MM>]	After specifying the days of enforcement, specify the following: start-time – Optional. Specifies the enforcement start time <HH:MM> – Specify the start time in hours and minutes in the HH:MM format. If no start time is specified, the time rule is enforced, on the specified days, at all time. end-time – Specifies the enforcement end time <HH:MM> – Specify the time in hours and minutes in the HH:MM format.

Examples

nx9500-6C8809(config-schedule-policy-test)#time-rule days weekdays start-time 10:00 end-time 23:30

nx9500-6C8809(config-schedule-policy-test)#show context
schedule-policy test
 description "Denies social networking sites on weekdays."
 time-rule days weekdays start-time 10:00 end-time 23:30
nx9500-6C8809(config-schedule-policy-test)#

Related Commands


no (schedule-policy-config-mode-commands)	Removes the time-rule from the schedule policy