no (dhcpv4-server-policy-config)

Negates a command or sets its default. When used in the DHCP server configuration context, the ‘no‘ command resets or reverts the DHCP server policy settings.

Supported on the following devices:

• Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
• Service Platforms: NX5500, NX7500, NX9500, NX9600
• Virtual Platforms: CX9000, VX9000

Syntax

no [bootp|dhcp-class|dhcp-pool|dhcp-server|option|ping]

no bootp ignore

no dhcp-class <DHCP-CLASS-NAME>

no dhcp-pool <DHCP-POOL-NAME> 

no dhcp-server activation-criteria 

no option <DHCP-OPTION>

no ping timeout

Parameters

no <PARAMETERS>

Examples

The following example shows the DHCP policy ‘test‘ settings before the ‘no‘ commands are executed:

nx9500-6C8809(config-dhcp-policy-test)#show context
dhcp-server-policy test
 bootp ignore 
 dhcp-class dhcpclass1
 dhcp-pool pool1
  address 1.2.3.4 class dhcpclass1
  update dns override
  --More--
nx9500-6C8809(config-dhcp-policy-test)#

nx9500-6C8809(config-dhcp-policy-test)#no bootp ignore

nx9500-6C8809(config-dhcp-policy-test)#no dhcp-class dhcpclass1

nx9500-6C8809(config-dhcp-policy-test)#no dhcp-pool pool1

The following example shows the DHCP policy ‘test‘ settings after the ‘no‘ commands are executed:

nx9500-6C8809(config-dhcp-policy-test)#show context
dhcp-server-policy test
nx9500-6C8809(config-dhcp-policy-test)#