passpoint-policy

The following table summarizes the Passpoint Policy configuration mode commands:

Table 1. Passpoint-Policy Config Mode Commands

Command

Description

3gpp

Configures a 3gpp (3rd Generation Partnership Project) PLMN (Public Land Mobile Network) ID

access-network-type

Configures the access network type element in this hotspot

connection-capability

Configures the connection capability element in this passpoint policy

domain-name

Configures the RF Domains to which this hotspot is applicable

hessid

Configures the HESSID (Homogeneous Extended Service Set Identifier) for a specified hotspot zone

internet

Advertises the availability of Internet access in this hotspot

ip-address-type

Advertises the IP address type used in this hotspot.

nai-realm

Configures a NAI (Network Access Identifier) realm name and enters its configuration mode

net-auth-type

Configures the network authentication type used in this hotspot

operator

Configures the operator friendly name for this hotspot

osuConfigures an OSU (online sign up) SSID/provider and enters its configuration mode
roam-consortium

Configures the list of Roaming Consortium OIs (Organization Identifiers) supported on this hotspot

venue

Configures the venue group and type for this passpoint policy

wan-metrics

Configures the WAN performance metrics for this hotspot

no

Removes or reverts passpoint policy configuration

Note

Note

The input parameter <HOSTNAME>, wherever used in syntaxes across this chapter, cannot include an underscore (_) character. In other words, the name of a device cannot contain an underscore.
Note

Note

For more information on common commands (clrscr, commit, help, revert, service, show, write, and exit), see Common Commands .