smart-rf

interface-config-radio-instance

Overrides Smart RF channel width setting on this radio. When configured, the radio overrides the Smart RF selected channel setting and operates in the channel configured using this command.

Supported in the following platforms:

Access Points — AP3000/X, AP5010, AP310i/e, AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7612, AP7632, AP7662, AP8533

Syntax

smart-rf preferred-channel-width [20MHz|40MHz|80MHz]

Parameters

smart-rf preferred-channel-width [20MHz|40MHz|80MHz]


smart-rf preferred-channel-width [20MHz\| 40MHz\|80MHz]	Configures the preferred channel width. The options are: 20MHz – Sets 20 MHz as the preferred channel of operation 40MHz – Sets 40MHz as the preferred channel of operation 80MHz – Sets 80MHz as the preferred channel of operation (default setting)

Example

nx9500-6C8809(config-profile-testAP510-if-radio1)#smart-rf preferred-channel-width 40MHz

nx9500-6C8809(config-profile-testAP510-if-radio1)#show context
 interface radio1
  smart-rf preferred-channel-width 40MHz
  rate-selection opportunistic
nx9500-6C8809(config-profile-testAP510-if-radio1)#

Related Commands


no (radio-interface-config-command)	Enables use of Smart RF selected channel of operation