shutdown

interface-config-vlan-instance

Shuts down the selected interface. Use the no shutdown command to enable an interface.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

shutdown

Parameters

None

Example

nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#shutdown

nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#show context
 interface vlan8
  ip address 10.0.0.1/8
  ip helper-address 172.16.10.3
  shutdown
nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#

Related Commands


no	Disables or reverts interface VLAN settings to their default