access-network-type

Configures the access network type for this hotspot. The beacons and probe responses communicate the type of hotspot (public, private, guest-use, emergency, etc.) to clients seeking access.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

access-network-type [chargeable-public|emergency-services|experimental|free-public|
personal-device|private|private-guest|wildcard]

Parameters

access-network-type [chargeable-public|emergency-services|experimental|free-public|
personal-device|private|private-guest|wildcard]


access-network-type	Select the access network type for this hotspot. The options are: chargeable-public – The network type is a chargeable public network. emergency-services – The network is used to provide emergency services only. experimental – The network is used for test or experimental purposes only. free-public – The network type is a free public. personal-device – The network is used for personal devices only. private – The network is a private network. private-guest – The network is a private network with guest access (default setting), wildcard – Includes all access network types. Note: If the network type is set to chargeable-public, probe responses advertise this hotspot as a chargeable-public hotspot.

Examples

nx9500-6C8809(config-passpoint-policy-test)#access-network-type chargeable-public

nx9500-6C8809(config-passpoint-policy-test)#show context
hotspot2-policy test
 access-network-type chargeable-public
 3gpp mcc 310 mnc 970
 3gpp mcc 505 mnc 14
nx9500-6C8809(config-passpoint-policy-test)#

Related Commands


no	Reverts to the default access network type setting (private)