ldap-query

Enables LDAP service and specifies the LDAP server query mode

Configuring the LDAP server query mode automatically enables LDAP service on this role policy. By default LDAP service is disabled.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

ldap-query [self|through-controller]

Parameters

ldap-query [self|through-controller]


self	Configures LDAP query mode as self. The AP directly queries the LDAP server for user information. Select ‘self‘ to use local LDAP server resources configured using the ldap-server command.
through-controller	Configures LDAP query mode as through-controller. The AP queries the LDAP server, for user information, through the controller. Use this option when the AP is layer 2 adopted to the controller.

Examples

nx9500-6C8809(config-role-policy-test)#ldap-query self

nx9500-6C8809(config-role-policy-test)#show context
role-policy test
 default-role use ip-access-list in test precedence 1
 ldap-query self
 ldap-deadperiod 100
nx9500-6C8809(config-role-policy-test)#

Related Commands


no (role-policy-config-mode-command)	Disables LDAP service on this role policy