copy

Copies a file (config, log, txt, etc.) from a specified location on to the logged device (access point, wireless controller, or service platform) and vice-verse.

The command also copies the ExtremeCloud IQ server's CA certificate chain from a specified location to the logged device. WiNG 7.3.1 devices will be auto-provisioned with the ExtremeCloud IQ server CA certificate chain. However, if needed, you can use the copy command to copy the ExtremeCloud IQ server's CA certificate chain.

WiNG 7.3.1 integrates the WiNG software with ExtremeCloud IQ. Going forward, WiNG devices will be able to connect to the ExtremeCloud IQ server and post, periodic statistics, device inventory, configuration parameters, location hierarchy, event logs, etc. to ExtremeCloud IQ. The CA certificate chain is required to validate the ExtremeCloud IQ server's identity and establish a secure, SSL-authenticated, connection between the server and device.

Note

Refer to the nsight-policy (global-config-mode) and server topics for information on configuring the ExtremeCloud IQ FQDN.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

copy [<SOURCE-FILE>|<SOURCE-URL>] [<DESTINATION-FILE>|<DESTINATION-URL>]

copy xiq-cachain from <XIQ-CA-CERT-LOCATION-URL>

Parameters

copy [<SOURCE-FILE>|<SOURCE-URL>] [<DESTINATION-FILE>|<DESTINATION-URL>]


copy	Copies a file (config, log, txt, etc.) from a specified source to the specified destination file Note: Copying a new config file to an existing running-config file merges the two files. Both files, existing and new, are applied as the current running-config. However, copying a new config file to a start-up config file replaces the existing file with the new file. We recommend that you erase the existing config file before copying the new configuration.
<SOURCE-FILE>	Specify the source file to copy.
<SOURCE-URL>	Specify the source file's location (URL).
<DESTINATION-FILE>	Specify the destination file to copy to.
<DESTINATION-URL>	Specify the destination file's location (URL).

copy xiq-cachain from <XIQ-CA-CERT-LOCATION-URL>


xiq-cachain	Copies the ExtremeCloud IQ server's CA certificate chain from a specified location to the logged WiNG device
from <XIQ-CA-CERT-LOCATION-URL>	Specify the location from where the CA certificate chain can be copied <XIQ-CA-CERT-LOCATION-URL> - Specify the path and file name.

Examples

Transferring file snmpd.log to remote TFTP server.

ap505-13403B#c#copy flash:/log/upgrade.log tftp://10.233.89.183/upgrade.log
Accessing running-config file from remote TFTP server into switch running-config.
ap505-13403B#c#copy tftp://10.233.89.183:/running-config running-config

Copying the ExtremeCloud IQ server CA certificate chain to on to the logged WiNG device.

nx9500-6C8809#copy xiq-cachain from tftp://<hostname|IP>[:port]/path/file