sampling interval

Configures the interval, in seconds, at which clients are sampled to determine their RSSI value

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

sampling-interval <5-60>

Parameters

sampling-interval <5-60>


sampling-interval <5-60>	Configures the interval, in seconds, between two successive client samplings <5-60> – Specify a value from 5 - 60 seconds. The default value is 15 seconds. Note: Higher the RSSI number, stronger is the signal.

Examples

nx9500-6C8809(config-roaming-assist-policy-test)#sampling-interval 10

nx9500-6C8809(config-roaming-assist-policy-test)#show context
roaming-assist-policy test
 aggressiveness medium-high
 sampling-interval 10
 monitoring-interval 40
 handoff-count 5
 detection-threshold -90
 handoff-threshold -75
 action log
 disassoc-time 7
nx9500-6C8809(config-roaming-assist-policy-test)#

Related Commands


no	Removes the configured sampling interval details