The following table summarizes the PRIV EXEC configuration mode commands:
| Command | Description |
|---|---|
| archive | Manages file archive operations |
| boot | Specifies the boot partition as primary or secondary. The device boots using the image stored in the specified partition. |
| captive-portal-page-upload | Uploads captive portal advanced pages to adopted access points |
| cd | Changes the current directory |
| change-password | Changes the password of the currently logged-in user |
| clear | Clears parameters, cache entries, table entries, and other similar entries |
| clock | Configures the system clock |
| cluster | Initiates a cluster context |
| configure | Enters the global configuration mode |
| commit | Commits changes made in the active session. |
| connect | Begins a console connection to a remote device |
| copy | Clears parameters, cache entries, table entries, and other similar entries |
| create-cluster | Creates a new cluster on a specified device |
| crypto | Enables encryption |
| crypto-cmp-cert-update | Triggers a CMP certificate update on a specified device or devices |
| database | Enables automatic repairing (vacuuming) and dropping of databases (Captive-portal and NSight) |
| database-backup | Backs up captive-portal and/or NSight database to a specified location and file on an FTP or SFTP server |
| database-restore | Restores a previously exported database [captive-portal and/or NSight]. Previously exported databases (backed up to a specified FTP or SFTP server) are restored to the original database. |
| delete | Deletes a specified file from the system |
| device-upgrade | Configures device firmware upgrade parameters |
| diff | Displays the differences between two files |
| dir | Displays the list of files on a file system |
| disable | Disables the privileged mode command set |
| edit | Edits a text file |
| erase | Erases a file system |
| factory-reset | Erases startup configuration on a specified device
or all devices within a specified RF Domain Note: Use
this command to revert an AP505 and AP510 model
access points personality flag to
'unknown'.
|
| file-sync | Configures parameters enabling syncing of PKCS#12 and wireless-bridge certificate between the staging-controller and adopted access points |
| help | Describes the interactive help system. |
| halt | Halts a device (access point, wireless controller, or service platform) |
| join-cluster | Adds a device (access point, wireless controller, or service platform), as cluster member, to an existing cluster of devices |
| l2tpv3 | Establishes or brings down L2TPV3 tunnels |
| logging | Modifies message logging parameters |
| mint | Configures MiNT settings |
| mkdir | Creates a new directory in the file system |
| more | Displays the contents of a file |
| no | Negates a command or sets its default |
| on | Executes the following commands in the RF Domain context: clrscr, do, end, exit, help, service, and show |
| opendns | Connects to the OpenDNS site using OpenDNS registered credentials (username, password) OR OpenDNS API token to fetch the OpenDNS device_id. This command is a part of the process of integrating access points, controllers, and service and virtual platforms with OpenDNS. |
| operational-mode | Resets a standalone AP's mode of operation from 'distributed' to
'centralized'. Note: This
command is only applicable on AP505, AP510 and AP560 model access
points.
|
| page | Toggles a device‘s (access point, wireless controller, or service platform) paging function |
| ping | Sends ICMP echo messages to a user-specified location |
| ping6 | Sends ICMPv6 echo messages to a user-specified location |
| pwd | Displays the current directory |
| re-elect | Re-elects the tunnel controller (wireless controller, platform, or access point) |
| reload | Halts a device (wireless controller, platform, or access point) and performs a warm reboot |
| rename | Renames a file in the existing file system |
| rmdir | Deletes an existing file from the file system |
| self | Displays the configuration context of the device |
| ssh | Connects to another device using a secure shell |
| telnet | Opens a Telnet session |
| terminal | Sets the length and width of the terminal window |
| telnet | Verifies the time taken by a particular command between request and response |
| time-it | Verifies the time taken by a particular command between request and response |
| traceroute | Traces the route to a defined IPv4 destination |
| traceroute6 | Traces the route to a defined IPv6 destination |
| upgrade | Upgrades the software image |
| upgrade-abort | Aborts an ongoing software image upgrade |
| exit | Ends the current CLI session and closes the session window |
| watch | Repeats the specific CLI command at a periodic interval |
| virtual-machine | Installs, configures, and monitors the status of VMs. This command is specific to NX9500 and NX9600 series service platforms, and CX9000 and VX9000 virtual platforms. |
| raid | Enables RAID management. This command is specific to the NX9500 and NX9600 series service platforms, and CX9000 and VX9000 virtual paltforms. |
Note
For information on common commands (clrscr, commit, help, revert, service, show, write, and exit), see Common Commands.Note
The input parameter <HOSTNAME>, if used in syntaxes across this chapter, cannot include an underscore (_) character.