lldp
Supported on the following devices:
- Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Parameters
lldp [receive|transmit]
| receive |
Enables LLDP
PDUs (Protocol Data Units) snooping. When enabled, the port
receives periodic updates from a multicast address informing about presence
of neighbors. This option is enabled by default. |
| transmit |
Enables LLDP PDU
transmission. When enabled, the port sends out periodic interface updates to
a multicast address to advertise its presence to neighbors. This option is
enabled by default. |
Example
nx9500-6C8809(config-profile-testnx5500-if-ge1)#lldp transmit
Related Commands
| no |
Disables or reverts interface settings to their default |
