upgrade-abort

Aborts an ongoing software image upgrade

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

upgrade-abort {on <DEVICE-OR-DOMAIN-NAME>}

Parameters

upgrade-abort {on <DEVICE-OR-DOMAIN-NAME>}


upgrade-abort	Aborts an ongoing software image upgrade
on <DEVICE-OR-DOMAIN-NAME>	Optional. Aborts an ongoing software image upgrade on a specified device or domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

Examples

nx9500-6C8809#upgrade ftp://anonymous:anonymous@192.168.13.10/LatestBuilds/NX9500-7.3.1.0-010D.img
Running from partition /dev/mtdblock6
Validating image file header
Making file system
Extracting files (this may take some time)..................

nx9500-6C8809#upgrade-abort

nx9500-6C8809#upgrade ftp://anonymous:anonymous@192.168.13.10/LatestBuilds/NX9500-7.3.1.0-010D.img
Running from partition /dev/mtdblock6
Validating image file header
Making file system
Extracting files (this may take some time)..................
Update error:  Aborted
nx9500-6C8809#