custom-auth

Configures custom user information

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

custom-auth info <LINE>

Parameters

custom-auth info <LINE>


info <LINE>	Configures information used for RADIUS lookup when custom-auth RADIUS access type is configured <LINE> – Guest data needs to be provided. Specify the name, e-mail address, and telephone number of the user.

Examples

nx9500-6C8809(config-captive-portal-test)#custom-auth info bob bob@examplecompany.com

nx9500-6C8809(config-captive-portal-test)#show context
captive-portal test
 access-type logging
 access-time 35
 custom-auth info bob bob@examplecompany.com
 connection-mode https
 accounting syslog host 172.16.10.13 port 1
nx9500-6C8809(config-captive-portal-test)#

Related Commands


no	Removes custom user information configured with this captive portal