wep64

Configures WEP64 parameters

Supported on the following devices:

Syntax

wep64 [key|keys-from-passkey|transmit-key]
wep64 key <1-4> [ascii|hex] [0 <WORD>|2 <WORD>|<WORD>]
wep64 keys-from-passkey <WORD>
wep64 transmit-key <1-4>

Parameters

wep64 key <1-4> [ascii|hex] [0 <WORD>|2 <WORD>|<WORD>]
wep64 Configures WEP64 parameters

The parameters are: key, key-from-passkey, and transmit-key.

key <1-4>] Configures pre-shared hex keys
  • <1-4> – Configures a maximum of four key indexes. Select a key index from 1 - 4.
ascii [0 <WORD>| 2 <WORD>|<WORD>] Sets keys as ASCII characters (5 characters for WEP64, 13 for WEP128)
  • 0 <WORD> – Configures a clear text key
  • 2 <WORD> – Configures an encrypted key
  • <WORD> – Configures key (10 hex or 5 ASCII characters for WEP64, 26 hex or 13 ASCII characters for WEP128).
hex [0 <WORD>| 2 <WORD>|<WORD>] Sets keys as hexadecimal characters (10 characters for WEP64, 26 for WEP128)
  • 0 <WORD> – Configures a clear text key
  • 2 <WORD> – Configures an encrypted key
  • <WORD> – Configures the key (10 hex or 5 ASCII characters for WEP64, 26 hex or 13 ASCII characters for WEP128)
wep64 keys-from-passkey <WORD>
keys-from-passkey <WORD> Specifies a pass key from which keys are derived
  • <WORD> – Specify a pass key from 4 - 32 characters.
wep64 transmit-key <1-4>
transmit-key <1-4> Configures the key index used for transmission from an AP to a wireless client or service platform
  • <1-4> – Specify a key index from 1 - 4.

Examples

NOC-NX9500(config-wlan-test2)#wep64 key 1 hex 1CBF427D50
NOC-NX9500(config-wlan-test2)#wep64 transmit-key 1
NOC-NX9500(config-wlan-test2)#show context
wlan test2
 ssid test2
 bridging-mode local
 encryption-type none
 authentication-type none
 wep64 key 1 hex 0 1CBF427D50
NOC-NX9500(config-wlan-test2)#

Related Commands

no (wlan-config-mode) Resets the WEP64 parameters to factory-default values