local-session-id

Configures the manual session's local session ID

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

local-session-id <1-63>

Parameters

local-session-id <1-63>


local-session-id <1-63>	Configures this manual session‘s local session ID <1-63> – Specify the ID from 1 - 63. This is the pseudowire ID for the session. This pseudowire ID is sent in a session establishment message to the L2TP peer.

Examples

nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#local-session-id 1

nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#show context l2tpv3 manual-session test
  local-cookie size 8 200 300   
  local-ip-address 1.2.3.4
  local-session-id 1
nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#

Related Commands


no	Removes the manual session's local session ID