ping (dhcpv4-server-policy-config)

Configures the DHCP server‘s ping timeout interval. The controller uses the timeout to intermittently ping and discover whether a client requested IP address is available or in use.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

ping timeout <1-10>

Parameters

ping timeout <1-10>


timeout <1-10>	Sets the ping timeout from 1 - 10 seconds. The default is 1 second.

Examples

nx9500-6C8809(config-dhcp-policy-test)#ping timeout 2

nx9500-6C8809(config-dhcp-policy-test)#show context
dhcp-server-policy test
 ping timeout 2
 option option1 200 ascii
nx9500-6C8809(config-dhcp-policy-test)#

Related Commands


no (dhcpv4-server-policy-config)	Resets the ping interval to 1 second