description

Defines this VLAN interface‘s description. Use this command to provide additional information about the VLAN.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

description <WORD>

Parameters

description <WORD>


description <WORD>	Configures a description for this VLAN interface (should not exceed 64 characters in length) <WORD> – Specify a description unique to the VLAN‘s specific configuration, to help differentiate it from other VLANs with similar configurations.

Example

nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#description “This VLAN interface is configured for the Sales Team”

nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#show context
 interface vlan8
  description "This VLAN interface is configured for the Sales Team"
  crypto map map1
nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#

Related Commands


no	Removes the VLAN interface description