use

interface-config-vlan-instance

Associates an IP (IPv4 and IPv6) access list, bonjour-gw-discovery policy, and an IPv6-router-advertisement policy with this VLAN interface

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

use [bonjour-gw-discovery-policy <POLICY-NAME>|ip-access-list in <IP-ACL-NAME>|ipv6-access-list in <IPv6-ACL-NAME>|ipv6-router-advertisement-policy <POLICY-NAME>|url-filter <URL-FILTER-NAME>]

Parameters

use [bonjour-gw-discovery-policy <POLICY-NAME>|ip-access-list in <IP-ACL-NAME>|
ipv6-access-list in <IPv6-ACL-NAME>|ipv6-router-advertisement-policy <POLICY-NAME>|
url-filter <URL-FILTER-NAME>]


bonjour-gw-discovery-policy <POLICY-NAME>	Uses an existing Bonjour GW Discovery policy with this VLAN interface. When associated, the Bonjour GW Discovery policy is applied for the Bonjour requests coming over the VLAN interface. <POLICY-NAME> – Specify the Bonjour GW Discovery policy name (should be existing and configured).
ip-access-list in <IP-ACCESS-LIST-NAME>	Uses a specified IPv4 access list with this interface in – Applies IPv4 ACL to incoming packets <IP-ACCESS-LIST-NAME> – Specify the IPv4 access list name.
ipv6-access-list in <IPv6-ACCESS-LIST-NAME>	Uses a specified IPv6 access list with this interface in – Applies IPv6 ACL to incoming packets <IPv6-ACCESS-LIST-NAME> – Specify the IPv6 access list name.
ipv6-router-advertisement-policy <POLICY-NAME>	Uses an existing IPv6 router advertisement policy with this VLAN interface. <POLICY-NAME> – Specify the IPv6 router advertisement policy name (should be existing and configured).
url-filter <URL-FILTER-NAME>	Enforces URL filtering on this VLAN interface by associating a URL filter <URL-FILTER-NAME> – Specify the URL filter name (should be existing and configured).

Example

nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#use ip-access-list in test

nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#show context
 interface vlan8
  ip address 10.0.0.1/8
  use ip-access-list in test
  ip helper-address 172.16.10.3
nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#

Related Commands


no	Disables or reverts interface VLAN settings to their default