interference-event

Specifies events contributing to the Smart RF WiFi interference calculations

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

interference-event [non-conforming-data|wireless-bridge]

Parameters

interference-event [non-conforming-data|wireless-bridge]


non-conforming-data	Considers non conforming data packets when calculating Smart RF interference
wireless-bridge	Considers Wireless Bridge (WDS) frames when calculating Smart RF interference

Examples

nx9500-6C8809(config-wips-policy-test)#interference-event non-conforming-data

nx9500-6C8809(config-wips-policy-test)#show context
wips-policy test
 history-throttle-duration 77
 event excessive 80211-replay-check-failure threshold-client 10 threshold-radio 99 filter-ageout 9
 event client-anomaly wellenreiter filter-ageout 99
 interference-event non-conforming-data
 ap-detection-ageout 50
 ap-detection-wait-time 15
nx9500-6C8809(config-wips-policy-test)#

Related Commands


no (wips-policy-config-mode-command)	Disables this WIPS policy signature as Smart RF interference source