mode

Sets the crypto map tunnel mode

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

mode [transport|tunnel]

Parameters

mode [transport|tunnel]


mode [transport\|tunnel]	Sets the mode of the tunnel for this crypto map transport – Initiates transport mode tunnel – Initiates tunnel mode (default setting)

Example

nx9500-6C8809(config-profile-default-ap8533-cryptomap-map1#1)#mode transport

nx9500-6C8809(config-profile-default-ap8533-cryptomap-map1#1)#show context
 crypto map map1 1 ipsec-manual
  mode transport
nx9500-6C8809(config-profile-default-ap8533-cryptomap-map1#1)#