clear lacp counters

clear lacp counters

Description

Clears the counters associated with Link Aggregations Control Protocol (LACP).

Syntax Description

This command has no parameters or variables.

Default

N/A.

Usage Guidelines

This command clears the following counters for LACP; it sets these counters back to 0 for every LACP port on the device:
  • LACP PDUs dropped on non_LACP ports.

  • Stats:
    • Rx - Accepted.

    • Rx - Dropped due to error in verifying PDU.

    • Rx - Dropped due to LACP not being up on this port.

    • Rx - Dropped due to matching own MAC.

    • Tx - Sent Successfully.

    • Tx - Transmit error.

Example

The following command clears the LACP counters on all ports:

clear lacp counters

History

This command was first available in ExtremeXOS 11.3.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.