Displays various show output for mirror instances.
| mirror_name | Displays the mirror name. |
| mirror_name_li | Displays mirror instance name for Lawful Intercept account only. You must have lawful intercept user privileges to specify this variable. |
| all | Displays all mirror instances. |
| enabled | Displays only enabled mirror instances. |
N/A.
Use this command to display mirror statistics and determine if mirroring is enabled or disabled on the switch.
The following command displays switch mirroring statistics:
Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow mirror all
Mirror MyDebugMirror (Disabled)
Description: This mirror sends traffic to PC-based Wireshark
Mirror to ports: 4-5 Loopback port: 6
Number of Mirroring filters:7
Mirroring filters configured:
Port number 7 in all vlans (ingress)
Port number 8 in vlan Default (ingress-and-egress)
Port number 9 in all vlans (egress)
Port number 10 in all vlans (ingress-and-egress)
Port number 11 in vlan Default (ingress)
Port number 12 in vlan Default (ingress)
Port number 13 in vlan Default (ingress)
Active ACL target action: Yes
Mirror DefaultMirror (Enabled)
Description: This mirror is used for debugging VRRP
Mirror to port: 15 is up
Number of Mirroring filters:1
Mirroring filters configured:
Port number 17 in vlan to_oslo (ingress)
Active ACL target action: Yes
The following example displays output for a lawful intercept user session:
* show mirror
DefaultMirror (Disabled)
Description: Default Mirror Instance, created automatically
Mirror to port: -
law_mirror (Enabled)
Description: user for lawful intercept
Mirror to port: 3
Source filter instances used : 2
Port 7, all vlans, ingress only
Port 8, all vlans, ingress only
main_mirror (Enabled)
Description:
Mirror instance for Admin
Mirror to port: 2
Source filter instances used : 1
Port 10, all vlans, ingress only
Mirrors defined: 3
Mirrors enabled: 2 (0 with egress filters)
HW filter instances used: 3 (Maximum 128)
This command was first available in ExtremeXOS 15.3.
The mirror_name_li variable was added in ExtremeXOS 15.3.2.
This command is available on the Summit X450-G2, X460-G2, X670-G2, X770, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.